-
BMW E46 Reinforcement plates for rear end
Take a good look at the photos because sometimes the problem is not visible at first. With this model the chassis is suitable for cracking for two reasons – due to the heavy foot on the gas pedal and the thim material at the base (1mm sheet thickness). The reinforcement plates we offer are the largest on the market,3mm sheet thickness and each one is separate – so the adjustment is the better.
Price range: 45,00€ through 140,00€ -
BMW E36/E46 Rear Trailing Arm Brackets
By replacing the factory suspension and lowering the car more than intended you change the geometry, you get a higher TOE than you can correct with the factory trailing arm bracket. They have smaller slots and this limits your adjustment.
Our product has twice the size of the slots and a greater range of adjustment. You can move the RTAB back and forth more to adjust the geometry to your liking. An essential part of any lowered car.
Compatible with e36 (except E36 TI), e46,Z3 and z4 chassis.
85,00€ -
E36 / e46 drift angle adaptes style 1
Introducing our precision-engineered Drift Angle Adapters—the ultimate bolt-on solution for drivers seeking to enhance their steering performance without compromising factory integrity. Designed for smooth installation on OEM knuckles, these adapters offer a significant increase in steering angle and responsiveness, tailored specifically for drifting applications.
Key Features
- Bolt-On Installation: No modifications required—simply install onto the factory knuckle using existing tie rods. Tapered holes for the lower control arm and tie rod positions mirror OEM specifications, ensuring consistent handling characteristics.
- Enhanced Steering Response: Achieve approximately 40% faster steering ratio, allowing for quicker transitions and improved control during drifts.
- Increased Steering Angle: Gain up to 60° of active steering angle, facilitating tighter and more precise drifts.
- Adjustable Ackermann Geometry: Choose between 0 Ackermann for reduced tire scrub and increased speed, or a small positive Ackermann for smoother steering feel.
- OEM Tie Rod Compatibility: Utilize the factory tie rods without the need for extensions or modifications.
- Precision-Engineered Geometry
Why Choose Our Drift Angle Adapters?
Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.
Compatibility
These adapters are compatible with a e30,e36 and e46 knuckle.
Ready to Drift Like a Pro?
Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.
Status: MADE TO ORDER
105,00€ -
BMW E46 Strut Brace Style 1
We have a front and rear strut braces for the BMW E46 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 120,00€ through 300,00€ -
BMW E46 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
BMW E46 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
155,00€BMW E46 Rear Trailing Arm Pocket
155,00€ -
BMW E46 Strut Brace Style 2
We have a front and rear strut braces for the BMW E46 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 165,00€ through 400,00€ -
BMW E46 Weld-in RACP brace
Tired of dealing with the notorious RACP issue on your E46 BMW? Look no further! Our weld-in kit is the ultimate solution you’ve been searching for. Designed to address the weak point in the chassis that’s at the root of these problems, this kit not only closes off the problematic area but also adds essential bracing to enhance your car’s ride and handling.
Why Choose Our Kit
* Comprehensive Solution Our kit doesn’t just patch up the issue – it provides a lasting fix by introducing a new frame rail that ties into the subframe mounts, ensuring a direct load path from the rear two subframe mounts to the chassis rails.
* Enhanced Strength By increasing the rigidity of the Rear Axle Carrier Panel (RACP) our kit prevents failures at critical points.
* Discreet Installation If you’re concerned about aesthetics, fret not. Our custom-made cover seamlessly matches the OEM appearance. Moreover, crafted from thicker material it enhances the floor sheet’s durability.
NOTE: The rear WELD-IN of the brace is compatible with all models: limousine, coupe, cabriolet, wagon, compact. The front WELD-IN plate is only compatible with sedans and coupes.
As an additional option, this set can be paired with a 4-point or 6-point brace, but it must be purchased as a complete kit, ensuring everything aligns perfectly.
Extended screws with detailed instructions are included in the kit.
Don’t let RACP issues ruin your driving experience. Contact us today for more information and take the first step towards a safer, smoother ride!
Price range: 175,00€ through 450,00€BMW E46 Weld-in RACP brace
Price range: 175,00€ through 450,00€ -
BMW E46 RACP X brace
This lower Xbrace connects all 4 points of the subframe. It strengthens the subframe and the connection to the chassis – later you can connect it to the rollcage by yourself. It comes complete with screws and installation kit,without paint but can be powdercoated in the color of your choice.
Price range: 200,00€ through 210,00€BMW E46 RACP X brace
Price range: 200,00€ through 210,00€ -
BMW E36/E46 Rear lower control CAMBER arms
Plug and play,easily adjustable rear lower control arm for your E36 / E46. Stronger design than factory for drifting or racing.
Production time is 2-3 weeks before shipping.225,00€ -
BMW E46 Strut Brace Style 2 CLEAR COATED
We have a front and rear strut braces for the BMW E46 Style 2 CLEAR COATED. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
We make clear coated braces only to order. Please allow 2-3 weeks for production time.
Price range: 250,00€ through 525,00€BMW E46 Strut Brace Style 2 CLEAR COATED
Price range: 250,00€ through 525,00€ -
E36 / e46 drift angle adaptes style 2
Unlock Your Drift Potential with Precision Angle Adapters
Elevate your drifting experience with our custom-made drift angle adapters, engineered for maximum performance and precision. Designed to provide a substantial increase in steering angle and responsiveness, these adapters are the ultimate upgrade for any serious drift enthusiast.
Key Features
- Up to 65° Steering Angle: Achieve an impressive 65 degrees of steering lock, allowing for deeper and more controlled drifts.
- Zero Ackerman Geometry: Experience near-parallel front steering, eliminating front wheel scrub and enhancing stability during high-angle drifts.
- 40% Faster Steering Response: Significantly reduce steering input delay, enabling quicker transitions and more precise control.
- Custom-Made TIE ROD with Spherical Bearing: Each adapter is tailored to your vehicle’s specifications, featuring a high-quality spherical bearing for smooth and consistent motion. BUMP STEER correction.
- Double Locking Mechanism: The tie rod screw is secured with a dual-locking system, preventing loosening during aggressive driving and ensuring safety
Why Choose Our Drift Angle Adapters?
Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.
Compatibility
These adapters are compatible with a e30,e36 and e46 knuckle.
Ready to Drift Like a Pro?
Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.
Status: MADE TO ORDER
265,00€
