-
BMW E28 / E24 (1981. – 1988.) strut braces
We have a front and rear strut braces for the BMW E28 / E24 (1981. – 1988.). It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 80,00€ through 260,00€BMW E28 / E24 (1981. – 1988.) strut braces
Price range: 80,00€ through 260,00€ -
BMW E46 4 point RACP Brace “W” style
The BMW e46 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 350,00€ through 730,00€BMW E46 4 point RACP Brace “W” style
Price range: 350,00€ through 730,00€ -
BMW E46 6point RACP brace SEATS SUITABLE clear coated
The BMW e46 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
Made exclusively to order, not in stock.
Price range: 575,00€ through 1.070,00€BMW E46 6point RACP brace SEATS SUITABLE clear coated
Price range: 575,00€ through 1.070,00€ -
BMW E30 Xbrace Style 2
We have the xbrace for the BMW E30 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
Custom made and TIG welded. Each was made to factory measurements. We use quality materials with exceptional tensile strength. The color is your choice.
Fits only with OEM swaybar and lolipop.
175,00€BMW E30 Xbrace Style 2
175,00€ -
-
Price range: 200,00€ through 240,00€E36 compact RACP brace
Price range: 200,00€ through 240,00€ -
BMW E46 4 point RACP Brace Style 1
The BMW e46 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 285,00€ through 675,00€BMW E46 4 point RACP Brace Style 1
Price range: 285,00€ through 675,00€ -
BMW E46 Strut Brace Style 2 CLEAR COATED
We have a front and rear strut braces for the BMW E46 Style 2 CLEAR COATED. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
We make clear coated braces only to order. Please allow 2-3 weeks for production time.
Price range: 250,00€ through 525,00€BMW E46 Strut Brace Style 2 CLEAR COATED
Price range: 250,00€ through 525,00€ -
Price range: 100,00€ through 220,00€E36 Compact Strut Brace
Price range: 100,00€ through 220,00€ -
BMW e36 Reinforcement plates
Complete set 95eur
Front 40eur
Rear subframe reinforcement plates 33eur
Rear trailing arm reinforcement plates 35eurPrice range: 33,00€ through 95,00€BMW e36 Reinforcement plates
Price range: 33,00€ through 95,00€ -
BMW e36 4 point RACP Brace Style 1
The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 225,00€ through 275,00€BMW e36 4 point RACP Brace Style 1
Price range: 225,00€ through 275,00€
