-
E36 / e46 drift angle adaptes style 1
Introducing our precision-engineered Drift Angle Adapters—the ultimate bolt-on solution for drivers seeking to enhance their steering performance without compromising factory integrity. Designed for smooth installation on OEM knuckles, these adapters offer a significant increase in steering angle and responsiveness, tailored specifically for drifting applications.
Key Features
- Bolt-On Installation: No modifications required—simply install onto the factory knuckle using existing tie rods. Tapered holes for the lower control arm and tie rod positions mirror OEM specifications, ensuring consistent handling characteristics.
- Enhanced Steering Response: Achieve approximately 40% faster steering ratio, allowing for quicker transitions and improved control during drifts.
- Increased Steering Angle: Gain up to 60° of active steering angle, facilitating tighter and more precise drifts.
- Adjustable Ackermann Geometry: Choose between 0 Ackermann for reduced tire scrub and increased speed, or a small positive Ackermann for smoother steering feel.
- OEM Tie Rod Compatibility: Utilize the factory tie rods without the need for extensions or modifications.
- Precision-Engineered Geometry
Why Choose Our Drift Angle Adapters?
Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.
Compatibility
These adapters are compatible with a e30,e36 and e46 knuckle.
Ready to Drift Like a Pro?
Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.
Status: MADE TO ORDER
105,00€ -
BMW E34 Strut Brace
We have a front and rear strut braces for the BMW E34. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 120,00€ through 140,00€BMW E34 Strut Brace
Price range: 120,00€ through 140,00€ -
BMW E46 Strut Brace Style 1
We have a front and rear strut braces for the BMW E46 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 120,00€ through 300,00€ -
BMW E46 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
BMW e36 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
BMW E36 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
135,00€BMW E36 Rear Trailing Arm Pocket
135,00€ -
BMW E30 Xbrace Style 1
We have the xbrace for the BMW E30 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
Custom made and TIG welded. Each was made to factory measurements. We use quality materials with exceptional tensile strength. The color is your choice.
140,00€BMW E30 Xbrace Style 1
140,00€ -
BMW E36 Strut Braces Style 2
We have a front and rear strut braces for the BMW E36 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
This strut bar will not fit your car if you have an ASC throttle body on your intake manifold.
Price range: 150,00€ through 400,00€BMW E36 Strut Braces Style 2
Price range: 150,00€ through 400,00€ -
BMW E30 strut braces Style 2
We have a front and rear strut braces for the BMW E30 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 150,00€ through 430,00€ -
BMW E46 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
155,00€BMW E46 Rear Trailing Arm Pocket
155,00€ -
BMW E46 Strut Brace Style 2
We have a front and rear strut braces for the BMW E46 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 165,00€ through 400,00€ -
Price range: 165,00€ through 200,00€BMW E36 Fixed strut brace style 1
Price range: 165,00€ through 200,00€
