• BMW e36 4 point RACP Brace Style 1

    BMW e36 4 point RACP Brace Style 1

    The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.

    We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.

    The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.

    Price range: 225,00€ through 275,00€

    BMW e36 4 point RACP Brace Style 1

    Price range: 225,00€ through 275,00€
  • BMW E46 Strut Brace Style 1

    BMW E46 Strut Brace Style 1

    We have a front and rear strut braces for the BMW E46 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.

    This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.

    We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.

    Price range: 120,00€ through 300,00€

    BMW E46 Strut Brace Style 1

    Price range: 120,00€ through 300,00€
  • BMW E36 Fixed strut brace style 1
    Price range: 165,00€ through 200,00€

    BMW E36 Fixed strut brace style 1

    Price range: 165,00€ through 200,00€
  • BMW E46 6 point RACP Brace Style 2 - CLEAR COATED

    BMW E46 6 point RACP Brace Style 2 – CLEAR COATED

    The BMW e46 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.

    Made exclusively to order, not in stock.

    Price range: 550,00€ through 1.045,00€

    BMW E46 6 point RACP Brace Style 2 – CLEAR COATED

    Price range: 550,00€ through 1.045,00€
  • BMW e36 Reinforcement cups for front 2points on the rear subframe

    If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.

    Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.

    This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)

  • BMW E36 Strut Braces Style 1

    BMW E36 Strut Braces Style 1

    We have a front and rear strut braces for the BMW E36 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.

    This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.

    We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.

    Price range: 100,00€ through 300,00€

    BMW E36 Strut Braces Style 1

    Price range: 100,00€ through 300,00€
  • BMW E30 strut braces Style 1

    BMW E30 strut braces Style 1

    We have a front and rear strut braces for the BMW E30 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.

    This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.

    We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.

    Price range: 100,00€ through 300,00€

    BMW E30 strut braces Style 1

    Price range: 100,00€ through 300,00€
  • BMW E46 Rear Trailing Arm Pocket

    This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.

  • BMW e36 4 point fixed RACP brace

    BMW e36 4 point fixed RACP brace

    The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.

    We offer reinforcement of the rear part of the car of the bolt-in type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.

    The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.

    Price range: 300,00€ through 330,00€

    BMW e36 4 point fixed RACP brace

    Price range: 300,00€ through 330,00€
  • BMW e36 4 point RACP Brace Style 2

    BMW e36 4 point RACP Brace Style 2

    The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.

    We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.

    The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.

    Price range: 325,00€ through 360,00€

    BMW e36 4 point RACP Brace Style 2

    Price range: 325,00€ through 360,00€
  • BMW E30 Rear strut tower brace to floor support assembly

    BMW E30 Rear strut tower brace to floor support assembly

    Designed to reduce chassis bending in the rear of the car under heavy load. Connecting at several points – from one to the other strut towers then connecting with a plate placed in the trunk floor. Diagonal strut with 4 uniball joint allows adjustment to each chassis.

    350,00€
  • E36 / e46 drift angle adaptes style 1

    E36 / e46 drift angle adaptes style 1

    Introducing our precision-engineered Drift Angle Adapters—the ultimate bolt-on solution for drivers seeking to enhance their steering performance without compromising factory integrity. Designed for smooth installation on OEM knuckles, these adapters offer a significant increase in steering angle and responsiveness, tailored specifically for drifting applications.

    Key Features

    • Bolt-On Installation: No modifications required—simply install onto the factory knuckle using existing tie rods. Tapered holes for the lower control arm and tie rod positions mirror OEM specifications, ensuring consistent handling characteristics.
    • Enhanced Steering Response: Achieve approximately 40% faster steering ratio, allowing for quicker transitions and improved control during drifts.
    • Increased Steering Angle: Gain up to 60° of active steering angle, facilitating tighter and more precise drifts.
    • Adjustable Ackermann Geometry: Choose between 0 Ackermann for reduced tire scrub and increased speed, or a small positive Ackermann for smoother steering feel.
    • OEM Tie Rod Compatibility: Utilize the factory tie rods without the need for extensions or modifications.
    • Precision-Engineered Geometry

      Why Choose Our Drift Angle Adapters?

      Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.

      Compatibility

      These adapters are compatible with a e30,e36 and e46 knuckle.

      Ready to Drift Like a Pro?

      Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.

    Status: MADE TO ORDER 

    105,00€

Main Menu