-
BMW E21 Strut bar
We have a front and rear strut braces for the BMW E21. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 100,00€ through 300,00€BMW E21 Strut bar
Price range: 100,00€ through 300,00€ -
BMW e36 4 point RACP Brace Style 1
The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 225,00€ through 275,00€BMW e36 4 point RACP Brace Style 1
Price range: 225,00€ through 275,00€ -
E36 / e46 drift angle adaptes style 2
Unlock Your Drift Potential with Precision Angle Adapters
Elevate your drifting experience with our custom-made drift angle adapters, engineered for maximum performance and precision. Designed to provide a substantial increase in steering angle and responsiveness, these adapters are the ultimate upgrade for any serious drift enthusiast.
Key Features
- Up to 65° Steering Angle: Achieve an impressive 65 degrees of steering lock, allowing for deeper and more controlled drifts.
- Zero Ackerman Geometry: Experience near-parallel front steering, eliminating front wheel scrub and enhancing stability during high-angle drifts.
- 40% Faster Steering Response: Significantly reduce steering input delay, enabling quicker transitions and more precise control.
- Custom-Made TIE ROD with Spherical Bearing: Each adapter is tailored to your vehicle’s specifications, featuring a high-quality spherical bearing for smooth and consistent motion. BUMP STEER correction.
- Double Locking Mechanism: The tie rod screw is secured with a dual-locking system, preventing loosening during aggressive driving and ensuring safety
Why Choose Our Drift Angle Adapters?
Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.
Compatibility
These adapters are compatible with a e30,e36 and e46 knuckle.
Ready to Drift Like a Pro?
Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.
Status: MADE TO ORDER
265,00€ -
BMW E28 / E24 (1981. – 1988.) strut braces
We have a front and rear strut braces for the BMW E28 / E24 (1981. – 1988.). It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 80,00€ through 260,00€BMW E28 / E24 (1981. – 1988.) strut braces
Price range: 80,00€ through 260,00€ -
Price range: 200,00€ through 240,00€E36 compact RACP brace
Price range: 200,00€ through 240,00€ -
BMW E36/E46 Rear lower control CAMBER arms
Plug and play,easily adjustable rear lower control arm for your E36 / E46. Stronger design than factory for drifting or racing.
Production time is 2-3 weeks before shipping.225,00€ -
-
Price range: 100,00€ through 220,00€E36 Compact Strut Brace
Price range: 100,00€ through 220,00€ -
BMW E46 RACP X brace
This lower Xbrace connects all 4 points of the subframe. It strengthens the subframe and the connection to the chassis – later you can connect it to the rollcage by yourself. It comes complete with screws and installation kit,without paint but can be powdercoated in the color of your choice.
Price range: 200,00€ through 210,00€BMW E46 RACP X brace
Price range: 200,00€ through 210,00€ -
Price range: 165,00€ through 200,00€BMW E36 Fixed strut brace style 1
Price range: 165,00€ through 200,00€ -
BMW E36 RACP X brace
This lower Xbrace connects all 4 points of the subframe. It strengthens the subframe and the connection to the chassis – later you can connect it to the rollcage by yourself. It comes complete with screws and installation kit,without paint but can be powdercoated in the color of your choice.
Price range: 175,00€ through 185,00€BMW E36 RACP X brace
Price range: 175,00€ through 185,00€ -
BMW E30 Xbrace Style 2
We have the xbrace for the BMW E30 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
Custom made and TIG welded. Each was made to factory measurements. We use quality materials with exceptional tensile strength. The color is your choice.
Fits only with OEM swaybar and lolipop.
175,00€BMW E30 Xbrace Style 2
175,00€