-
BMW E30 strut braces Style 2
We have a front and rear strut braces for the BMW E30 Style 2. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 150,00€ through 430,00€ -
BMW E46 Strut Brace Style 1
We have a front and rear strut braces for the BMW E46 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 120,00€ through 300,00€ -
Price range: 165,00€ through 200,00€BMW E36 Fixed strut brace style 1
Price range: 165,00€ through 200,00€ -
BMW E46 6 point RACP Brace Style 2 – CLEAR COATED
The BMW e46 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
Made exclusively to order, not in stock.
Price range: 550,00€ through 1.045,00€BMW E46 6 point RACP Brace Style 2 – CLEAR COATED
Price range: 550,00€ through 1.045,00€ -
BMW e36 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
BMW E36 Strut Braces Style 1
We have a front and rear strut braces for the BMW E36 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 100,00€ through 300,00€BMW E36 Strut Braces Style 1
Price range: 100,00€ through 300,00€ -
BMW E30 strut braces Style 1
We have a front and rear strut braces for the BMW E30 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 100,00€ through 300,00€BMW E30 strut braces Style 1
Price range: 100,00€ through 300,00€ -
BMW E46 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
155,00€BMW E46 Rear Trailing Arm Pocket
155,00€ -
BMW e36 4 point fixed RACP brace
The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the bolt-in type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 300,00€ through 330,00€BMW e36 4 point fixed RACP brace
Price range: 300,00€ through 330,00€ -
BMW e36 4 point RACP Brace Style 2
The BMW e36 has an extremely light chassis. The opinion of our experts is that the chassis must be strengthened at a couple of key points. One of these is the reinforcement of the rear strut towers and the reinforcement of the rear axle and differential brackets. This is where the problem often occurs and the chassis breaks due to an increase in the torque of the modified engine or a higher load by modifying the suspension.
We offer reinforcement of the rear part of the car of the assembly-disassembly type with binding in several points – from strut towers to the rear subframe mounts. This reinforcement can be made of high quality structural steel or Chromium molybdenum. The powdercoating isin the color of your choice. You get the kit needed for installation.
The installation itself requires a couple of small modifications. It is necessary to replace the factory screws for hanging the frame with a longer one so that reinforcement can be placed on them. At the place where the longer screw must pass through the chassis and enter the trunk, it is necessary to drill a small hole. The factory foresaw this and a drilling site was marked. When the subframe bolts are installed, you have everything you need to install reinforcements in the trunk.
Price range: 325,00€ through 360,00€BMW e36 4 point RACP Brace Style 2
Price range: 325,00€ through 360,00€ -
BMW E30 Rear strut tower brace to floor support assembly
Designed to reduce chassis bending in the rear of the car under heavy load. Connecting at several points – from one to the other strut towers then connecting with a plate placed in the trunk floor. Diagonal strut with 4 uniball joint allows adjustment to each chassis.
350,00€ -
BMW E36/E46 Rear Trailing Arm Brackets
By replacing the factory suspension and lowering the car more than intended you change the geometry, you get a higher TOE than you can correct with the factory trailing arm bracket. They have smaller slots and this limits your adjustment.
Our product has twice the size of the slots and a greater range of adjustment. You can move the RTAB back and forth more to adjust the geometry to your liking. An essential part of any lowered car.
Compatible with e36 (except E36 TI), e46,Z3 and z4 chassis.
85,00€
