-
BMW E46 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
155,00€BMW E46 Rear Trailing Arm Pocket
155,00€ -
BMW E46 Reinforcement plates for rear end
Take a good look at the photos because sometimes the problem is not visible at first. With this model the chassis is suitable for cracking for two reasons – due to the heavy foot on the gas pedal and the thim material at the base (1mm sheet thickness). The reinforcement plates we offer are the largest on the market,3mm sheet thickness and each one is separate – so the adjustment is the better.
Price range: 45,00€ through 140,00€ -
BMW E34 Strut Brace
We have a front and rear strut braces for the BMW E34. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
This is a 3pcs custom made strut bar,TIG welded. Each was made to factory measurements. If you are not sure about the correctness of your chassis, we can check. Holders are shaped to fit the strut towers as well as possible.
We use quality materials with exceptional tensile strength. You can buy this product in two variants: seamless steel or chrome molybdenum (4130). The color is your choice.
Price range: 120,00€ through 140,00€BMW E34 Strut Brace
Price range: 120,00€ through 140,00€ -
BMW E30 Xbrace Style 1
We have the xbrace for the BMW E30 Style 1. It is intended to strengthen the chassis part between the strut towers. The installation gives you much better and more precise steering, the car reacts more firmly to sudden changes of direction. It is necessary for vehicles running on hard suspension and wide rims.
Custom made and TIG welded. Each was made to factory measurements. We use quality materials with exceptional tensile strength. The color is your choice.
140,00€BMW E30 Xbrace Style 1
140,00€ -
BMW E36 Rear Trailing Arm Pocket
This is every driver’s nightmare. Let’s be real, after 20+ years the rear control arm mounting points can’t be great. If you’re getting your car ready to go on the track, this is the first thing you want to do to make sure you’re safe. The fact is that the factory pocket is made of sheet metal with a thickness of 1 mm. If it’s rusty, don’t even think about this venture. Our replacement is 3mm thick. Spacers are retained due to factory geometry.
135,00€BMW E36 Rear Trailing Arm Pocket
135,00€ -
BMW e36 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
BMW E46 Reinforcement cups for front 2points on the rear subframe
If you have a rear panel and cannot install a 6point bar this is a MUST HAVE part for your chassis. You will strengthen the front 2 mounting points of the subframe for the chassis and avoid serious damage caused by cracking.
Set includes: 2 reinforcement cups, 2 extended screws for the subframe, drilling kit.
This reinforcement is sold without paint, you need to paint it yourself after installation (welding is recommended)
135,00€ -
E36 / e46 drift angle adaptes style 1
Introducing our precision-engineered Drift Angle Adapters—the ultimate bolt-on solution for drivers seeking to enhance their steering performance without compromising factory integrity. Designed for smooth installation on OEM knuckles, these adapters offer a significant increase in steering angle and responsiveness, tailored specifically for drifting applications.
Key Features
- Bolt-On Installation: No modifications required—simply install onto the factory knuckle using existing tie rods. Tapered holes for the lower control arm and tie rod positions mirror OEM specifications, ensuring consistent handling characteristics.
- Enhanced Steering Response: Achieve approximately 40% faster steering ratio, allowing for quicker transitions and improved control during drifts.
- Increased Steering Angle: Gain up to 60° of active steering angle, facilitating tighter and more precise drifts.
- Adjustable Ackermann Geometry: Choose between 0 Ackermann for reduced tire scrub and increased speed, or a small positive Ackermann for smoother steering feel.
- OEM Tie Rod Compatibility: Utilize the factory tie rods without the need for extensions or modifications.
- Precision-Engineered Geometry
Why Choose Our Drift Angle Adapters?
Our adapters are crafted with precision and durability in mind, offering a significant performance boost without compromising on safety. Whether you’re a professional drifter or a weekend warrior, these adapters provide the control and confidence needed to push your limits.
Compatibility
These adapters are compatible with a e30,e36 and e46 knuckle.
Ready to Drift Like a Pro?
Don’t settle for stock steering angles that limit your drifting potential. Upgrade to our precision-engineered drift angle adapters and experience the difference. Contact us today to place your order and take your drifting to the next level.
Status: MADE TO ORDER
105,00€ -
-
BMW e36 Reinforcement plates
Complete set 95eur
Front 40eur
Rear subframe reinforcement plates 33eur
Rear trailing arm reinforcement plates 35eurPrice range: 33,00€ through 95,00€BMW e36 Reinforcement plates
Price range: 33,00€ through 95,00€ -
BMW E36/E46 Rear Trailing Arm Brackets
By replacing the factory suspension and lowering the car more than intended you change the geometry, you get a higher TOE than you can correct with the factory trailing arm bracket. They have smaller slots and this limits your adjustment.
Our product has twice the size of the slots and a greater range of adjustment. You can move the RTAB back and forth more to adjust the geometry to your liking. An essential part of any lowered car.
Compatible with e36 (except E36 TI), e46,Z3 and z4 chassis.
85,00€
